Service Specifications - Toyota Land Cruiser 2006 Owner's Manual

Service specifications

ENGINE
Valve clearance (engine cold), mm (in.):
Intake 0.15 – 0.25 (0.006 – 0.010)
Exhaust 0.25 – 0.35 (0.010 – 0.014)
Spark plug type:
DENSO SK20R11
NGK IFR6A11
Spark plug gap, mm (in.):
1.1 (0.043)
ENGINE LUBRICATION
Oil capacity (drain and refill), L (qt.,
Imp.qt.)
With filter 6.8 (7.2, 6.0)
Without filter 6.4 (6.8, 5.6)
Oil grade:
"Toyota Genuine Motor Oil" is used in
your Toyota vehicle. Use Toyota ap-
proved "Toyota Genuine Motor Oil" or
equivalent to satisfy the following grade
and viscosity.
Oil grade:
ILSAC multigrade engine oil
Recommended viscosity:
SAE 5W−30
Outside temperature
Please contact your Toyota dealer for fur-
ther details.
COOLING SYSTEM
Total capacity, L (qt., Imp.qt.)
Without rear heater 14.7 (15.5, 12.9)
With rear heater 15.4 (16.3, 13.6)
Coolant type:
"Toyota Super Long Life Coolant" is used
in your Toyota vehicle at factory fill. In
order to avoid technical problems, only use
"Toyota Super Long Life Coolant" or similar
high quality ethylene glycol based non−sili-
cate, non−amine, non−nitrite, and non−bo-
rate coolant with long−life hybrid organic
acid technology. (Coolant with long−life hy-
brid organic acid technology is a combina-
tion of low phosphates and organic acids.)
Do not use plain water alone.
Please contact your Toyota dealer for fur-
ther details.
BATTERY
∗
Open voltage at 20_C (68_F):
12.6 – 12.8 V Fully charged
12.2 – 12.4 V Half charged
11.8 – 12.0 V Discharged
∗
: Voltage that is checked 20 minutes af-
ter the key is removed with all the lights
turned off
Charging rates:
5 A max.
351