Toyota Land Cruiser 2006 Owner's Manual page 175

TURNING THE SYSTEM ON AND OFF
To turn the cruise control on, press the
"ON−OFF" button. The "CRUISE" indicator
light on the instrument panel will come on
to indicate that the cruise control is opera-
tional. Pressing the "ON−OFF"
again turns the system off.
When the system is turned off, cruising
speed must be reset when the cruise con-
trol is turned on again.
CAUTION
To avoid accidentally engaging the
cruise control, turn the system off
when it is not in use. Make sure the
"CRUISE" indicator light is off.
button
SETTING THE CRUISING SPEED
The transmission must be in "D" or "4"
before you set the cruising speed.
Bring your vehicle to the desired speed,
push the lever down in the "– SET" direc-
tion and release it. This sets the vehicle
at that speed.
If the speed is not satisfactory, tap the
lever up for a faster speed, or tap it down
for a slower speed. Each tap changes the
set speed by 1.6 km/h (1.0 mph). You can
now take your foot off the accelerator
pedal.
165