Table of Contents
Advertisement
When connecting a jack handle exten-
sion with a jack handle end, use a
jack handle to tighten the bolts on the
joints as shown in the illustration.
When connecting the jack handle with
extension, tighten the wing bolt on the
joint securely. Make sure the hollow
meets the bolt on every joint when
you tighten the bolts.
NOTICE
Tighten all the joints securely.
Otherwise, the extension may
come off and it may damage
the paint or vehicle body.
288
2. Remove the access hole cover on
the rear bumper with a flathead
screwdriver.
To protect the paint, place several
sheets of paper over the paintwork.
3. Insert the jack handle end into the
lowering screw through the access
hole and turn it counterclockwise
with pushing it to the front lightly.
Advertisement
Chapters
Table of Contents
