Rear View Monitor System - Toyota Land Cruiser 2006 Owner's Manual

The display indicates between the range
of –22°F and 122°F.
The key must be in the "ON" position.

Rear view monitor system

The rear view monitor system assists
the driver by displaying an image of
the view behind the vehicle while back-
ing up. The image is displayed in re-
verse on the screen. This allows the
image to appear in the same manner as
that of the rear view mirror.
To display the rear view image on the
screen, place the selector lever in the
"R" position when the ignition switch
in the "ON" position.
If you move the selector lever out of the
"R" position, the screen returns to the
previous screen. Operating another func-
tion of the navigation system will display
another screen.
The rear view monitor system is a supple-
ment device intended to assist back up.
When backing up, be sure to check be-
hind and all around the vehicle visually.
CAUTION
D
Never depend on the rear
monitor system entirely when back-
ing up. Always make sure your in-
tended path is clear.
Use caution just as you would when
backing up any vehicle.
D
Never back up while looking only at
the screen. The image on
screen is different from actual con-
ditions. Depicted distances between
objects and flat surfaces will differ
from actual distances. If you back
up while looking only at the screen,
you may hit a vehicle, a person or
an object. When backing up, be
sure to check behind and all around
the vehicle visually and with mir-
rors before proceeding.
D
Do not use the system when the
back door is not completely closed.
view
the
213