Power Windows - Toyota Land Cruiser 2006 Owner's Manual

You can set or cancel the automatic
unlocking functions:
Be sure to apply the parking brake when
performing the following operations.
To select the unlocking linked with the
shift position:
1. Close all doors and turn the ignition
switch to the "ON" position.
2. Shift the selector lever to the "P" posi-
tion.
3. Within 10 seconds of turning the igni-
tion switch to the "ON" position, press
and hold the driver's side power door
lock switch in the unlock position for
5 seconds and then release.
The doors will be locked and unlocked
to indicate that the function is set.
To cancel the function, do the above op-
eration again.
22
To select the unlocking linked with the
ignition switch:
1. Close all doors and turn the ignition
switch to the "ON" position.
2. Shift the selector lever from "P" to the
"N" position.
3. Within 10 seconds of turning the igni-
tion switch to the "ON" position, press
and hold the driver's side power door
lock switch in the unlock position for
5 seconds and then release.
The doors will be locked and unlocked
to indicate that the function is set.
To cancel the function, do the above op-
eration again.

Power windows

12C010a
The windows can be operated with the
switch on each side door.
The power windows work when the ignition
switch is in the "ON" position.
Key off operation: If both front doors are
closed, they work for 45 seconds even
after the ignition switch is turned off. They
stop working when either front door is
opened.
OPERATING THE DRIVER'S WINDOW
Use the switch on the driver's door.
Normal operation: The window moves as
long as you hold the switch.
To open: Lightly push down the switch.
To close: Lightly pull up the switch.