An NTC temperature sensor (accessory) must be connected for
measuring the pipe temperature and for automatic calculation of
superheating and subcooling. Testo Smart Probes (e.g. testo 115i) can
be used.
Before each measurement, check that the refrigerant hoses are in
flawless condition.
Before each measurement, zero the pressure sensors. All connections
must be pressureless (ambient pressure). Press the button
for 2 seconds to zero the sensors.
1
Click on Measure.
2
Click on
AC +
The Refrigeration measurement menu opens.
3
Set refrigerant.
You have the option of setting up favourite refrigerants in the App.
These then appear at the beginning of the refrigerant list.
To do this, click on the asterisk next to the refrigerant in the refrigerant
list (App).
The newly set refrigerant is displayed in the refrigerant list.
4
Click on
.
Configuration menu opens.
Refrigeration.
8 Smart App
[▲] (P=O)
67