Using the Public Address Button
This button enables the external speaker to be able to
transmit the radio user announcement publicly.
Press
to toggle the public address feature on
or off.
Using the Response Selector
The Response Selector is mainly designed to control
the lightbar. Refer to the following recommended
application of Response Selector for the lightbar:
•
When you turn the Response Selector to 0, the
lightbar is off.
•
When you turn the Response Selector to 1, the
lightbar is in take down mode.
•
When you turn the Response Selector to 2, the
lightbar is in pursuit mode without the siren.
•
When you turn the Response Selector to 3, the
lightbar is in pursuit mode with siren enabled.
Once you turn the knob to the required number,
except 0, the number will have green backlight to
indicate it is activated.
Response Selector can also be preprogrammed to
support other functions such as siren, send status
update and GPS.
1 Turn the knob to 1, 2 or 3.
The radio executes the preprogrammed actions.
2 Turn to another number to change the required
actions or turn the knob to 0 to turn off the actions.
Note:
If the Response Selector is pointing at 1, 2 or
3 during power up, the radio will execute the
selected actions upon powering up.
Universal Relay Controller
The Universal Relay Controller (URC) is a versatile
relay module that controls how the patterns on the
Light Bar operate.
The URC receives logic level input signals which are
configured or conditioned by PLCs, process
controllers and indicators to switch on/off a series of
output signals. The URC supports up to 25
customized patterns; each pattern is a combination of
10 relays in the URC.
The buttons or knob which support URC are:
145
English