Table of Contents
Advertisement
Ignition
Auto Power
Off Timer
Although both Inactivity Auto Power Off and Ignition
Auto Power Off can be enabled together, Ignition
Auto Power Off timer is mutually exclusive with
Inactivity Auto Power Off timer when both are
enabled. During the last two minutes of the timer
countdown, the radio generates continuous low tone
and blinks Powering Off warning on the display until
the timer expires or the timer is reset. The radio
automatically powers off after the timer expires. The
duration of the timer is preprogrammed.
Voice Announcement
This feature enables the radio to audibly indicate the
current feature mode, zone or channel the user has
just assigned. This audio indicator can be customized
per customer requirements. This is typically useful
122
English
This timer begins once the vehicle
key is removed, when the voltage at
the ignition sense is removed. While
the timer is active any user
interaction with the radio resets the
timer. When the vehicle key is
reapplied, the voltage at the ignition
is reconnected, this timer is stopped.
when the user is having difficulty reading the content
shown on the display.
Each voice announcement is within a limit of three
seconds maximum. The sum duration of all different
voice announcements in a radio shall be no more
than 1000 seconds.
Note:
This feature must be preprogrammed by a
qualified radio technician.
Check with your agent if Voice Announcement
is available for the feature you need.
The two options of priority for the Voice
Announcement available are:
High Enables the voice of the feature to announce
even when the radio is receiving calls.
Low Disables the voice of the feature from
announcing when the radio is receiving calls.
You hear a voice announcement when the features
below are preprogrammed in the radio.
•
The radio powers up. The radio announces the
current zone and channel it is transmitting.
Advertisement
Table of Contents
