Receiving And Responding To A Radio Call; Receiving And Responding To A Talkgroup Call - Motorola APX MOBILE O9 CONTROL HEAD User Manual

Note:
Repeat this procedure to change the zone and
channel of the programmed button.
Short press of the programmed button
changes your current transmission to the zone
and channel programmed in this button.

Receiving and Responding to a Radio Call

Once you have selected the required channel and/or
zone, you can proceed to receive and respond to
calls.
A
B
C
A Red LED
B Yellow LED
C Green LED
The LED lights up solid red while the radio is
transmitting. In conventional mode, the LED lights up
solid yellow when the radio is receiving a
transmission. In trunking mode, there is no LED
indication when the radio receives a transmission.
If the radio is receiving a secure transmission, the
LED blinks yellow.

Receiving and Responding to a Talkgroup Call

To receive a call from a group of users, your radio
must be configured as part of that talkgroup.
When you receive a talkgroup call (while on the Home
screen) the radio triggers for your attention with one
of the following scenarios depending on the system
your radio is configured:
• For ASTRO Conventional system, the LED lights
up solid yellow. The display shows the talkgroup
alias or ID, and the caller alias or ID.
• For Trunking system, the display shows the caller
alias or ID.
1 Hold the microphone vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
2 Press the PTT button to respond to the call.
51
English