Table of Contents
Advertisement
A-61058 January 2003
4. When this screen is displayed, you may press the Stop
Advance key at any time while the film is advancing. When the
supply spool runs out of film or the Stop Advance key is
pressed, the Film Control screen will be redisplayed.
NOTES:
•
If you press the Film Supply key, the amount of the film
remaining in the upper and/or lower cassette will be
displayed on the screen as current units (English=feet;
metric=meters). The media supply indicators also display
the amount of film remaining in the cassettes as
percentages. For example, 3 bars (|||) would indicate 30%
of film remaining.
•
The Error symbol is only displayed when an error has been
posted to the Error Log. If the Error symbol is displayed,
you can view the message(s) not previously viewed by
pressing the Clear Message key. Up to the last ten
messages can be viewed on the screen by pressing the
Clear Message key. If there are more than ten messages,
you can view the rest of them via the Error Log screen. For
more information, see the section entitled "Viewing error
messages" in this chapter.
3-11
Advertisement
Table of Contents
