Table of Contents
Advertisement
A-61058 January 2003
6. Open a new box of Reference Archive Media and remove the
spool of media.
NOTE: Use the empty box to store the exposed media before
and after processing.
7. Peel off the paper band from around the spool.
8. Unwind approximately 18 inches (46 cm) of media.
9. Lift the light guard and place the spool of media on the supply
spindle with the number 1 side up.
Light Guard
Lug
New Spool
of Media
Holes
10. Slowly rotate the spool until the two round holes on the spool
engage the lugs on the spindle.
11. Lower the light guard.
2-5
Advertisement
Table of Contents
