Table of Contents
Advertisement
Loading media into a
cassette
2-4
IMPORTANT: Always load and unload the media in subdued,
indirect light to help prevent "fogging."
1. Select Kodak Reference Archive Media of the desired length,
and the corresponding cassette.
2. Check the cassette display:
• Verify that the media supply gauge shows the cassette is
empty (no bars).
• Verify that there is not a low battery symbol. If a low battery
symbol appears, or the cassette window is blank, replace the
battery (refer to the section entitled, "Replacing the media
cassette battery").
3. Place the cassette on a flat surface with the top cover side up.
4. Press down on the cover latch and turn counterclockwise to
unlock the top cover.
5. Remove the top cover and set it aside.
A-61058 January 2003
Advertisement
Table of Contents
