Table of Contents
Advertisement
2-6
12. Thread the media around the guide roller, drive roller, and idler
roller, following the path indicated by the threading arrows
inside the media cassette.
13. Fold back approximately 1/2 inch (1 cm) at the end of the
media.
14. Pick up the take-up spool and hold it with the number 1 side
up.
15. Insert the folded end of the media into the slot in the take-up
spool core.
16. Rotate the spool counterclockwise to secure the media on the
spool.
Fold media back
1/2 inch (1 cm)
A-61058 January 2003
Advertisement
Table of Contents
