Table of Contents
Advertisement
The camcorder sets the point when the loudest
*
sound in the past 1 second is detected, as the
sound of a club hitting the ball.
Notes
If the camcorder cannot detect the sound
of a club hitting the ball, the camcorder
automatically sets the impact point at 0.5
second before the START/STOP button has
been pressed, and records a movie in the time
period between 1.5 seconds before the impact
point to 0.5 second after the impact point.
The size of photos becomes 1,920 1,080.
You cannot record sound.
Image quality is not as good as that of normal
recording.
The [
REC Mode] will be set to [Standard
] automatically.
You cannot record movies with [Golf Shot]
when you set the image quality to standard
definition image quality (STD).
Tips
To use the self-timer, touch [ / ]. With
[ / ] set to [On], press START/STOP to
start countdown of the timer. The point when
countdown reaches 0 is assumed as the moment
of impact and motion before and after 0 is
recorded.
If camera shake is excessive, or there are moving
objects in the background during recording,
image analysis will not be performed effectively,
and images may contain noise as a result. It is
recommended that you record images under
stable conditions (for example, using a tripod).
Impact sound is detected by the internal
microphone even when an external microphone
or the XLR Adaptor is attached.
GB
0
Camera/Audio
(Items for customized
shooting)
See "Using menus" (p. 74) on the operation.
The default settings are marked with .
Gain
See page 50.
AGC Limit
You can select the upper limit for the Auto
Gain Control (AGC) from [Off] (21dB, the
default setting), [18dB], [15dB], [12dB],
[9dB], [6dB], [3dB] and [0dB].
Notes
If you adjust the gain manually, you cannot
obtain the effect of [AGC Limit].
White Balance
See page 51.
Spot Focus
You can select and adjust the focal point to
aim it at a subject not located at the center
of the screen.
Touch the subject of which you want to
adjust the focus.
To adjust the focus automatically, touch
[Auto].
Notes
[Focus] is automatically set to [Manual].
Advertisement
Table of Contents
