Table of Contents
Advertisement
Self-diagnosis display/
Warning indicators
When an error occurs, a warning indicator
appears on the LCD screen or in the
viewfinder.
You can fix some problems associated with
the symptoms yourself. If the problem
persists even after you have tried a couple
of times, contact your Sony dealer or local
authorized Sony service facility.
C:(or E:) : (Self-diagnosis display)
C:04:
The battery pack is not an "InfoLITHIUM"
battery pack (V series). Use an
"InfoLITHIUM" battery pack (V series)
(p. 116).
Connect the DC plug of the AC Adaptor to the
DC IN jack of your camcorder securely (p. 16).
C:06:
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
C:13: / C:32:
Remove the power source. Reconnect it and
operate your camcorder again.
E: :
Follow the steps from on page 98.
(Battery level warning)
The battery pack is nearly used up.
Depending on the operating environment or
battery conditions, may flash, even if there
are about 20 minutes remaining.
(Warning indicator pertaining to
battery pack temperature)
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
(Warning indicator pertaining to
memory card)
Slow flashing
Free spaces for recording images are running
out. For the type of memory card you can use
with your camcorder, see page 27.
No memory card is inserted (p. 26).
Fast flashing
There are not enough free spaces for recording
images. After storing the images on other
media (p. 64), delete unnecessary images, or
format the memory card (p. 58).
The image data base file may be damaged.
Check the data base file by touching
(MENU) [Rec/Media SET]
[Repair Img. DB F.] the recording medium.
The memory card is damaged.
(Warning indicators pertaining to
memory card formatting)
The memory card is damaged.
The memory card is not formatted correctly
(p. 58).
(Warning indicator pertaining to
incompatible memory card)
Incompatible memory card is inserted (p. 27).
(Warning indicator pertaining to
the write-protect of the memory card)
The memory card is write-protected.
Access to the memory card was restricted on
another device.
(Warning indicators pertaining to
external media device)
The image data base file may be damaged.
Check the data base file by touching
(MENU) [Rec/Media SET]
[Repair Img. DB F.] the recording medium.
The external media device may be damaged.
GB
10
Advertisement
Table of Contents
