Table of Contents
Advertisement
Histogram
You can adjust the histogram (p. 47) with
touch control.
Off
Does not display the histogram.
On
Displays the brightness level 100.
On[Zebra Point]
Displays lines of brightness level set with
[Zebra] and brightness level 100.
Zebra
The zebra pattern is a strip pattern
displayed over a part of an image on the
screen when the part is higher than the
preset brightness level. You can display
a zebra pattern as a guide for adjusting
brightness. The zebra pattern will not be
recorded with the image.
Off
Does not display the zebra pattern.
On
and the brightness level appear on the
screen.
Level
You can select the brightness level between 70
and 100 or 100+. The default setting is [70].
Notes
With a subject that exceeds a brightness level of
100 IRE, the image may become overexposed.
Tips
IRE (Institute of Radio Engineers) is a measure
of the video signal level that is used as the bases
of brightness; the reference level (pedestal
level) is set to 0 (%) and the maximum level
(completely white level) is set to 100 (%).
Peaking
On/Off
When you select [On],
and you can display an image on the screen
with its outlines enhanced. This function
helps you to adjust the focus. The default
setting is [Off].
Color
You can select peaking color from [White],
[Red] and [Yellow]. The default setting is
[White].
Level
You can select a peaking sensitivity from
[High], [Middle] and [Low]. The default
setting is [Middle].
Notes
The outlines of the recorded images to the
media are not enhanced.
Tips
You can focus more easily using this function in
combination with the expanded focus function
(p. 44).
Marker
On/Off
When you select [On], you can display
markers. The default setting is [Off].
Markers will not be recorded on the
recording media.
Center
When you select [On], you can display
a marker at the center of the screen. The
default setting is [On].
appears
GB
Advertisement
Table of Contents
