Table of Contents
Advertisement
camcorder and take it to a warm place. Leave
the camcorder there for a while, then turn on
your camcorder.
The menu settings have been changed
automatically.
While Intelligent Auto is active, some menu
settings related to image quality will be
changed automatically.
The following menu items return to the
default settings when you switch between
movie recording and photo recording and
playback modes.
[
Self-Timer]
[Tele Macro]
Your camcorder gets warm.
Your camcorder may become warm during
operation. This is not a malfunction.
A rattling noise can be heard when you
shake the camcorder.
If no noise is heard when the camcorder is
turned on and is in the movie/photo recording
mode, the noise is produced by the movement
of the internal lens. This is not a malfunction.
Intelligent Auto is canceled.
The Intelligent Auto setting is canceled if you
change the following settings:
[Smooth Slow Rec]
[Golf Shot]
[White Balance]
[Spot Focus]
[Focus]
[Low Lux]
[
Cinematone]
[Tele Macro]
[
SteadyShot]
[
SteadyShot]
[Auto Back Light]
[Face Detection]
Nightshot
When the AUTO/MANUAL switch is set to
MAN
[AE Shift]
[White Balance Shift]
[IRIS]
[Gain]
[Shutter Speed]
[AGC Limit]
The supplied Wireless Remote
Commander does not function.
Set [Remote Ctrl] to [On] (p. 95).
Insert a battery into the battery holder with
the +/– polarities correctly matching the
+/– marks (p. 129).
Remove any obstructions between the
Wireless Remote Commander and the remote
sensor.
Point the remote sensor away from strong light
sources such as direct sunlight or overhead
lighting. Otherwise, the Wireless Remote
Commander may not function properly.
Remove the supplied lens hood with lens
cover.
Another DVD device malfunctions when
you use the supplied Wireless Remote
Commander.
Select a commander mode other than DVD 2
for your DVD device, or cover the sensor of
your DVD device with black paper.
When a device is connected to the
REMOTE jack, the camcorder or the device
does not operate properly.
The connected device may react slowly to
some operations, such as zooming.
If you disconnect the cable from the
device while the cable is still connected
to the camcorder's REMOTE jack, the
camcorder may not restore the proper
settings. Disconnect the cable also from the
camcorder's REMOTE jack.
GB
Advertisement
Table of Contents
