Table of Contents
Advertisement
Notes
The maximum continuous recordable time of movies is about 13 hours.
When a movie file exceeds 2 GB, the next movie file is created automatically.
It will take several seconds until you can start recording after you turn on the camcorder. You cannot
operate your camcorder during this time.
The following states will be indicated if data is still being written onto the recording media after recording
has finished. During this time, do not apply shock or vibration to the camcorder, or remove the battery or
AC Adaptor.
ACCESS lamp (p. 28) is lit or flashing
The media icon in the upper right of the LCD screen is flashing
Tips
See page 109 on the recordable time of movies.
You can record photos during movie recording by pressing PHOTO fully (Dual Rec, p. 45).
[
SteadyShot] is set to [Standard] in the default setting.
You can adjust the focus, etc. automatically by specifying the priority subject. (Tracking focus function,
p. 44).
You can set the recording lamp not to turn on (p. 95).
You can capture photos from recorded movies (p. 62).
You can check the recordable time, estimated remaining capacity, etc., by touching
[Rec/Media SET] [Media Info].
The LCD screen of your camcorder can display recording images across the entire screen (full pixel
display). However, this may cause slight trimming of the top, bottom, right and left edges of images when
played back on a TV which is not compatible with full pixel display. In this case, set [Safety Zone] (p. 88),
and record images using the outer frame displayed on the screen as a guide.
Data code during recording
The recording date, time and condition, and coordinates are recorded automatically on the recording
media. They are not displayed during recording. However, you can check them as [Data Code] during
playback. To display them, touch
Code] a desired setting
You can embed date and time in the recording data (p. 84).
Shooting photos
(Movie): When recording a movie
(Photo): When recording a photo
GB
(MENU) [Setup] [
MODE button
(Playback Settings)] [Data
.
PHOTO button
When
disappears, the photo is recorded.
(MENU)
Flashes Lights up
Advertisement
Table of Contents
