Table of Contents
Advertisement
SNMP CONFIGURATION
For configuring SNMP, is possible to use the wizard web page for a simple configuration.
Advanced configuration requires to edit snmp.conf. This file can be downloaded and
uploaded from the web page or via FTP, in the FTP folder /cfg/, with user "admin" (default
password: "admin").
Each line of the file is parsed by NetMan 208 and must begin with one of these keywords:
#: for comment, the line is skipped.
addUser: for adding a new user and setting the passwords
addGroup: for putting a user into a group
addAccessEntry: for enabling access privileges to a group
addView: for adding privileges
addManager: for adding SNMP Manager which will receive SNMP traps.
The correct syntax for addUser is:
addUser <userName> <authProtocol> <privProtocol> <authPassword> <privPassword>
<userName> is the name of the user.
<authProtocol> is the protocol for authentication of this user during SNMP sessions.
Possible values are:
noauth
(no authentication will be used)
md5
(MD5 will be used for authentication)
sha
(SHA will be used for authentication)
<privProtocol> is the protocol for privacy of this user during SNMP sessions. Possible values
are:
nopriv
(no privacy will be used)
des
(DES will be used for privacy)
aes128
(AES with 128-bit key)
aes192
(AES with 192-bit key)
aes256
(AES with 256-bit key)
<authPassword> is the password for authentication; it must be set to * when not used.
<privPassword> is the password for privacy; it must be set to * when not used.
The correct syntax for addGroup is:
addGroup <securityModel> <userName> <groupName>
<securityModel> is the security model. When using authentication and/or privacy,
securityModel must be USM. Possible values are:
USM
(User-based Security Model with SNMPv3)
v2
(SNMPv2)
v1
(SNMPv1)
<userName> is the name of the user, must match one of the user name defined with
addUser.
<groupName> is the name of the group.
Please note that a userName can be assigned to only one group.
- 90 -
Hide quick links:
Advertisement
Table of Contents
