Riello UPS Netman208 Installation And User Manual page 22

Field
Hostname
Static IP/DHCP
IP Address
Netmask
Gateway
Primary DNS
Secondary DNS
Enable IPv6
Method
Privacy Extension
Enable FTP
protocol
Enable Serial
network tunneling
Enable UDP
UDP port
UDP Password
(1)
This port must be the same as configured in the UPSMon software
Description
Enter the Netman 208 host name
Choose between static IP or dynamic IP
Enter the IP address
Enter the netmask to be used together with the static IP address
Enter the name or the address of the network gateway
Enter the name or the address of the preferred DNS to be used
Enter the name or the address of the alternative DNS to be used
Allow to enable IPv6 protocol
Available method: Stateless
Option for requesting usage or random-generated IPv6 address instead of
pre-defined address creation (related to MAC address)
To enable the FTP protocol
To enable the serial network tunnelling protocol
To enable UDP/UPSMon service
Enter the port where the UDP/UPSMon service is started
To change the password used for UDP/UPSMon communication
- 22 -
(1)