Front Panel; Network Port; Reset Button; Serial Port - Riello UPS Netman208 Installation And User Manual

F
RONT PANEL

Network port

Netman 208 connects to 10/100/1000 Mbps Ethernet networks by means of connector RJ45. The
LEDs built into the connector describe the status of the network:
Left LED (green)
OFF
ON
Blinking
OFF
OFF
ON
Blinking

Reset button

The reset button enables the user to execute a system reboot or enter the recovery mode.
System reboot: keep the reset button pressed until the status led starts blinking and then

release it.
Recovery mode: keep the reset button pressed; first the status led starts blinking, then turns

to solid green (approx. 5 seconds). When the led is solid green, release the reset button.

Serial port

Netman 208 makes available a RS232/RS485 serial communication port (for more details, see
paragraph "Technical data").
Right LED
Link / Activity
(yellow)
OFF Link Off
OFF 1000 Link / No Activity
OFF 1000 Link / Activity (RX, TX)
ON 100 Link / No Activity
Blinking 100 Link / Activity (RX, TX)
ON 10 Link / No Activity
Blinking 10 Link / Activity (RX, TX)
- 9 -
Network port
Reset button
Serial port
Status led