Device Values And Events History Log Archive; Eventlog; Datalog (Only For Ups Devices) - Riello UPS Netman208 Installation And User Manual

D
EVICE VALUES AND EVENTS HISTORY LOG ARCHIVE
Netman 208 records the device values (Datalog) and events (Eventlog) in a history log database.

Eventlog

The Eventlog service is always active and records all relevant device events in the 'event.db' file.
The file can be downloaded via FTP or can be viewed through the web page without credentials.
With the "Email report" service, is sent a .csv with the event of the last day or week according to your
setting. The data are saved in circular list mode; thus the most recent data are saved by overwriting
the oldest data.
On the web page, these icons will be shown on the "type" column:
 A red dot if the event is the start of an alarm condition.
A green dot if the event is the end of an alarm condition.

 A blue dot otherwise.

Datalog (only for UPS devices)

The Datalog service records the main data of the UPS in the 'datalog.db' file.
This service writes a record each hour at 00 minutes, which summarizes the data of the past hour:
values are recorded at their minimum, maximum and medium. Records older than one year get
overwritten with new records.
The file can be downloaded via FTP or can be viewed through the web page (only the most important
values are shown on the web page) without credentials.
With the "Email report" service, the last records (last day or last 7 days according to your settings)
will be sent in a .csv format.
- 13 -