Riello UPS Netman208 Installation And User Manual page 26

The TEST activates temporarily the rules forcing the user to wait some time before any CONFIRM
action:
At this moment the rules are temporarily active, giving some time to the User to check them:
-
in case of connection lost the User can reboot the Netman 208 (physically un-plugging and
re-plugging again in the slot) and connection is restored as it was before firewall TEST, so
the User can re-check the rules and TEST again with the new rule changes
Only after the forced count-down time, if behavior of the rules is validated the User can click on the
CONFIRM button:
After CONFIRM button, the activated rules are written, saved, applied and ready for the
next reboot. From now, in case of Netman 208 not reachable, the only solution is to reset
it to the default configuration, losing any configuration applied.
- 26 -