Configuration Via Ssh - Riello UPS Netman208 Installation And User Manual

CONFIGURATION VIA SSH

Netman 208 is provided by default with the SSH disabled. The SSH client service can be
enabled/disabled only via http.
To configure Netman 208 via SSH it is necessary to:
 Execute a SSH client on a PC connected in a network to Netman 208 set with the IP address
of the device to be configured.
 At the login prompt, enter "admin".
At the password prompt, enter the current password (default password: "admin").

During password's typing, no character is shown.
For proper configuration of Netman 208, you must configure the SSH client so that
the backspace key sends "Control-H".
Please verify the keyboard options of your SSH client.
Once login has been effected, the screen of the start menu is displayed. From this screen it is
possible to access the various menus to change Netman 208 settings.
- 82 -