Riello UPS Netman208 Installation And User Manual page 52

Condition
Condition duration
(minutes)
Delay next (seconds)
Source
Target
Restore on power on
Target Netman
The priority order of the actions in the action list can be changed, selecting and moving the action
row up or down with the mouse.
NOTE
The vSphere DRS automation function can be used by forcing the target host in
Maintenance mode.
SHUTDOWN ON EVENT
It is possible configure the UPS shutdown delay in seconds, this counter will start at the same time
of the shutdown actions listed on the Action list.
Additionally, the commands will be executed when on battery low condition and when shutdown is
active.
SAVE
This button SAVE the configuration, please note that the service will be restarted.
Power fail: When the UPS detects a main failure, the configured
condition duration time (minutes) will begin to countdown. Once
the timer has elapsed the selected action will start. If the main
returns within this time, then the action will be cancelled.
Autonomy less: When the calculated battery autonomy of the
UPS falls below the configured condition duration time(minutes)
the selected action will start. If main returns within this time, then
the action will be cancelled.
The duration that the selected condition (Power fail or Autonomy
less) must be active for before the selected action starts.
Delay in seconds to execute the next action
If the action is Shutdown Host, VMotion or Maintenance; an IP
address or hostname of a present host or VCSA must be
specified.
If the action is Shutdown VM or Shutdown Cluster a valid VM
name or Cluster name, present in the infrastructure must be
specified.
If the action is VMotion, a valid IP address or hostname must be
specified
In case of shutdown actions the Netman 208 will restart
automatically all the VMs that where shutdown.
In case of Maintenance action the Netman 208 will restore the
host from maintenance.
Please note that to restart the host the Wake on Lan feature must
be used instead.
For future use.
- 52 -