Display And Sound Settings; Setting The Information Displayed During Shooting/Playback - Ricoh R02010 Operating Manual

Display and Sound Settings

Setting the Information Displayed During Shooting/
Playback
You can set the information displayed when the display is switched using
j in the shooting mode or playback mode.
1
Select [Shooting Info. Display] or [Playback Info. Display] in the
D3 menu, and press d.
The [Shooting Info. Display] or [Playback Info. Display] screen appears.
For [Playback Info. Display], proceed to Step 3.
2
Use cd to select [LCD Display], and
press n to set each display mode
on/off.
6
[Standard Info. Display], [Simplified Info. Dis-
play], [No Information Display], and [Display
Off ] can be set.
Display modes without a check mark are not
displayed when j is pressed during shoot-
ing. Select at least one display mode.
3
Use abcd to select a display item, and press n to set it on/
off.
[Shooting Info. Display]
Histogram
Grid Guide
Highlight Alert
Electronic Level
126
Displays a histogram.
Displays a guide grid.
Blinks areas expected to be overexposed in red during shooting.
Displays an indicator for confirming camera tilt.
Shooting Info. Display
LCD Display
Histogram
Grid Guide
Highlight Alert
Electronic Level
Cancel Cancel OK OK