Ricoh R02010 Operating Manual page 145

Problem
The flash does not The subject is dark.
illuminate the subject.
Flash output is not appropriate.
Images are too bright. Flash output is not appropriate. Adjust the flash output, move away
The monitor brightness is not
appropriate.
Images are too dark. The monitor brightness is not
appropriate.
The exposure compensation is
set to a negative value.
The colors of images The camera is unable to adjust
are unnatural. white balance for shooting con-
ditions using auto white balance.
The monitor brightness Ambient lighting is poor or dif-
changes during fers from that used for autofocus.
autofocus.
Electronic level indica- Electronic level indicators are
tors are not displayed. hidden.
The image is not level The camera was moving during
although level indicator shooting because you were on
showed that the a moving object or due to other
camera was level. causes.
The subject is not level.
Cause
Adjust the flash output.
from the subject, or use a different
light source.
Adjust the brightness of the monitor
in the E3 menu.
Adjust the brightness of the monitor
in the E3 menu.
Change the exposure compensa-
tion value.
Include a white object with the
subject or select the settings other
than [Auto White Balance] for [White
Balance].
This is normal and does not indicate
a malfunction.
Check the [Shooting Info. Display]
setting in the D3 menu.
Do not move the camera during
shooting.
Check the subject.
Solution
p.66
p.66
p.128
p.128
p.53
p.69
p.126
Page
—
7
—
—
143