Technical Data; Transportation And Installation - HSM StoreEx HDS 150 Operating Instructions Manual

3. Technical data

Cutting type
Cutting size
Security level (DIN 66399)
Cutting speed
Throughput (Hard drives / hr.)
Electrical connection
Power consumption
Dimensions (W x D x H in mm)
Weight
Shredded material container volumes
Sound pressure level emissions
(idling/under load)
Operating ambient conditions:
Temperature
Relative humidity
Height above SL

4. Transportation and installation

WARNING
Risk of crushing
during transport
Risk of crushing due to parts
tipping over and falling.
• Use suitable lifting and
transportation devices with
suffi cient load capacity.
• Pay attention to the centre of
gravity of the device when lifting
and transporting.
• No persons must be in close
proximity to the device during
transport.
• The means of transport that are used must
be assessed for the weight of the device. The
maximum permitted load of the lifting and trans-
portation equipment must be greater than the
weight of the parts being transported.
• Unsuitable lifting and transportation devices can
07/2022
100V/ 120V/ 220V - 240V / 50/60 Hz
Max. 90%, non-condensing
result in the device tipping over or falling down.
• The palettes with the packed device
must be placed on a level and solid surface (not
onto carpet).
• The device may only be set up and operated in
dry rooms.
• Ensure the device is set up in such a way that
the power plug is easily accessible and the venti-
lation slots are free.
• Lock the front castors of the device by pressing
down the brake lever.
StoreEx HDS 150
english
Strip cut
40 mm
T-1, E-2, H-3
22 mm/s
approx. 210
1500 W
1200 x 815 x 1325
534 kg
37.0 l
61 dB(A) / 78 dB(A)
-10 °C to +25 °C
max. 2000 m
19