Table of Contents
Advertisement
English
Device settings
CAL denominations
Default factory settings
Sensor Sensitivity
settings
Versions
Firmware version
Software version
26
Setting description
Select a denomination range: 1 - 1000
or 500 - 100.000
Start reset procedure. After resetting,
the device is set back to default factory
settings. All user settings are cleared.
Change sensitivity settings of UV, MG,
Width detection. Not recommended to
change unless a specific currency or
denomination requires this to improve
the machine's detection performance.
Setting description
Shows which firmware version is
installed.
Shows which software version is
installed.
More info, articles, tutorials and videos at: support.safescan.com
Advertisement
Table of Contents
