Error
CHAINED,
DOUBLE
HALF
BANKNOTE
WIDTH,
LENGTH
More info, articles, tutorials and videos at: support.safescan.com
Cause
- More than one bank-
note is being fed
through the machine
at the same time.
- An incomplete, torn
or half-size banknote
has been detected.
- A banknote with a
non-conforming size
has been detected.
Solution(s)
- Ensure that there are no
banknotes stuck, fold-
ed or glued together.
- Check the banknote
quality. If no obvious
visibl issues are found,
count the banknote
again and check if the
problem persists.
- The hopper may be set
too loose. Adjust the
hopper screw in clock-
wise direction. See
chapter maintenance
and servicing.
- Check the banknote
quality. If no obvious
visible issues are found,
count the banknote
again and check if the
problem persists.
- Check the banknote
quality. If no obvious
visible issues are found,
count the banknote
again and check if the
problem persists.
English
19