L.B. White Premier CS700 Owner's Manual And Instructions page 16

16
Premier Ductable Heater
4. When reinstalling the belt, ensure the arrows are
directed CCW. See Fig. 7.
FIG. 5
FIG. 6
FIG. 7
Owner's Manual • Premier Ductable Heater
Removing Belt Linkage
Extended use may cause the belt to loosen on either the fan
pulley or the motor pulley. Reducing the linkage on the belt may
be required.
BELT
GUARD
1. Remove the belt per belt replacement procedure.
2. Flip the belt inside out.
3. Hold the belt upside down and flex the belt to expose
4. Twist the tab 90° parallel to the slot.
5. Pull the end of the link over the tab.
6. Rotate the belt end with the tab 90°.
7. Pull the belt end through the two link.
8. Remove the link tab from the belt.
9. To re-assembly, reverse the processes.
10. Flip the belt back before installing it onto the pulleys.
link tab.
LINK TAB