Table of Contents
Advertisement
NOTE: The setting 100% can lead to "burn in" effects on the display if the unit is operated in
this setting for a very long time. In order to avoid such "burn in effects" please switch the unit
to stand by, if not in use.
3.1.3
Set autoplay
When AUTO PLAY is activated, the CD player will start playing automatically every time a CD
is inserted. IF AUTO PLAY is deactivated, the player will read the TOC (table of contents) of
the inserted disc and then go to STOP mode.
3.1.4
Skip unused inputs
Unused inputs can be deactivated (SKIPPED). Your device will then skip these inputs when
the source selectors (2, 3) are applied or if you select a sound source via the optionally
available RC 9 remote control or the free
3.1.5
Define input names
You can individually set the names (max. 8 characters) of the different sources shown in the
display. To adjust a name, proceed as follows:
Press one of the option keys (2, 3) to select an input. Press REPEAT (6) to select the position
and use the SKIP buttons (13, 14) to define the character (holding the key pressed changes
the character every half second).
3.1.6
Set IR control
In addition to control your device via the optionally available RC 9 remote control or the free
RC S App for iOS and
classic RC 3 or RC 8 infrared remote controls. In order to receive a respective infrared signal
of the RC 3 or RC 8, please make sure to activate the set ir control function (ON).
3.2 Reset (factory default settings)
The Reset menu cancels certain or all settings and makes the unit return to default settings.
To enter the Reset menu, please switch off your device on the rear of the unit at the mains
switch (35). Keep both the REPEAT button (6) and the STOP button (10) pressed while you
switch on the unit again (35). As soon as the display shows the reset menu you can release
both buttons (6, 10).
Select if you just want to clear the input names (NAMES) with the PAUSE button (11) or reset
the unit completely (ALL) by pressing the PLAY button (12).
RC S App for iOS and Android.
Android, a range of essential functions can also be controlled via the
20
Advertisement
Table of Contents
