AVM OVATION MP 8.2 Operating Instructions Manual page 10

ü After a brief starting process, your device automatically connects to your local home
network and is ready to be operated via the
ü Launch the RC S App on your smartphone or tablet. The RC S App will now automatically
search and list all available AVM devices in your local network with their respective device
name and IP adress (e.g. "192.168.xxx.x" etc.).
ü Choose an availbale device and wait until a connection is established.
1.9.2 Setting up a wireless WiFi connection
To set up your device with a wireless WiFi connection, you need to download and install the
free RC S App for iOS and Android
following instructions refer to the installation process by use of the RC S App. For details on
how to connect your device with the RC 9 remote control, please refer to section 1.7.1. A
detailed description of the entire functionality of the RC 9 remote control and the
for iOS and Android
our AVM website: www.avm.audio.
NOTE: Before using the wireless WiFi functionality of your device, an initial set-up of a wired
LAN connection is mandatory. This non-recurring step is required to set-up an initial WiFi
connection between your device and the RC S App via your local home network.
ü Please switch off your device on the rear side of the unit (30).
ü Plug a LAN cable from your local router into the LAN port of your device (25).
ü Switch on the device on the rear side of the unit (30). Wait until the device has started and
went into stand by mode. Now, switch it on with the power button on the front side (1).
ü After a brief starting process your device automatically connects to your local home
network and is ready to be operated via the
or use the optionally available RC 9 remote control. The
can be found in a separate manual on the respective product pages of
RC S App for iOS and Android.
RC S App for iOS and Android.
10
RC S App