Software Updates - AVM OVATION MP 8.2 Operating Instructions Manual

CAUTION: Unless your local home network has been configured with static IP addresses,
we highly recommend to activate the DHCP option.
ü The integrated streaming module of your device will now restart. This process can take up
to 30 seconds. Please make sure to not switch off the device while it is restarting (which
is happening under the hood without any indication on the display of the device).
ü The device is now connected with your wireless WiFi network.
PLEASE NOTE: When switching from a wired LAN connection to a wireless WiFi connection
or vice versa, a restart of the integrated streaming module is always required. To restart the
streaming module via the RC S App, please go to the Settings tab, choose Device Settings,
Network, and press the Restart button on the upper right-hand corner. Switching off the
device on the rear-side with the mains switch (30) also causes a restart of the integrated
streaming module.

1.10 Software updates

To get the most out of your AVM HiFi streaming system, please make sure you always keep
the RC S App and the streaming software of your device up-to-date. You can download the
latest version of the RC S App in the
whether your device runs the latest version of the streaming software, please make sure the
device is connected to the internet (see section 1.9) and follow the instructions below.
ü Streaming software update via the RC S App: Navigate to the Settings tab and choose
Device Settings / Software / Check for Updates.
ü Streaming software update via the RC 9 remote control: Navigate to the Receiver
Settings menu and choose Software / Update.
Apple App Store or the
13
Google Play Store. To check