Table of Contents
Advertisement
3.1.3
Set autoplay
When AUTO PLAY is activated, the CD player will start playing automatically every time a CD
is inserted. IF AUTO PLAY is deactivated, the player will read the TOC (table of contents) of
the inserted disc and then go to STOP mode.
3.1.4
skip unused inputs
Unused inputs can be deactivated (SKIPPED). The CD 6.2 will then skip these inputs when
the source selectors (2, 3) are applied or if you select a sound source via the RC 3 remote
control.
3.1.5
define input names
You can individually set the names (max. 8 characters) of the different sources shown in the
display. To adjust a name, proceed as follows:
Press one of the option keys (2, 3) to select an input. Press REPEAT (6) to select the position
and use the SKIP buttons (13, 14) to define the character (holding the key pressed changes
the character every half second).
3.2 Reset (factory default settings)
The Reset menu cancels certain or all settings and makes the unit return to default settings.
To enter the Reset menu, please switch off your device on the rear of the unit at the mains
switch (29). Keep both the REPEAT button (6) and the STOP button (10) pressed while you
switch on the unit again (29). As soon as the display shows the reset menu you can release
both buttons (6, 10).
Select if you just want to clear the input names (NAMES) with the PAUSE button (11) or reset
the unit completely (ALL) by pressing the PLAY button (12).
Pressing the STOP button (10) will bring the unit back to normal operating mode without
resetting any item (CANCEL).
16
Advertisement
Table of Contents
