24 GHz radar tools and development environment
XENSIV™ 24 GHz radar demo boards
2 Running radar applications
Figure 9
Binary image file selection
Navigate to the Binary folder and select the (*.hex) file inside it (e.g., P2G_FW.hex), then click on Open in
−
the dialog box.
− Successful selection of the (*.hex) file results in listing its filename below the Select File... button
Figure 10
Binary image selection
Click on the Program button, which opens the SEGGER progress window. It either verifies successful
−
Flashing or shows an error message.
− If programming succeeds, the message Programming is successful! appears.
User manual
9
Revision 1.40
2023-02-14