Table of Contents
Advertisement
24 GHz radar tools and development environment
XENSIV™ 24 GHz radar demo boards
3 Customizing radar applications
3
Customizing radar applications
Firmware (FW) is a piece of software written in C language to control different ICs and peripherals via the host
processor, which is the XMC™ Cortex™-M MCU embedded in Infineon's 24 GHz radar demo boards.
The 24 GHz radar firmware is released as a ready-to-run DAVE™4 project, where source files are generated
based on the DAVE™ APPs used, which are graphical-configurable application-oriented software components,
used to enable quick reuse and customization.
This section explains how to customize, build, Flash and debug radar applications built on generated DAVE™
code, and run them on the 24 GHz radar demo board.
3.1
Building, Flashing and debugging the DAVE™ project
After installing the DAVE™ IDE, the user can start the program to build and load the 24 GHz radar firmware
applications as follows:
Download and unzip the 24 GHz radar firmware package, making sure not to modify the package folder
•
structure.
Open the project workspace with the DAVE™ toolchain:
•
Run the DAVE™ toolchain and wait for the program to start, which asks for the workspace location.
−
Enter a path or browse to the desired folder via the Browse... button and confirm the choice with the OK
−
button.
Figure 23
DAVE™ workspace launcher
Note:
It is recommended that the active workspace folder is located not too many levels below the file
system root to avoid build errors caused by exceeding the Windows path length character
limitations.
Once the DAVE™ workspace is opened, select Import... in the File menu to display the Import dialog box.
−
Within the Import dialog box, select Infineon, DAVE Project and click on the Next button.
−
User manual
17
Revision 1.40
2023-02-14
Advertisement
Table of Contents
