Download Print this page
Infineon Distance2Go Product Brief
Infineon Distance2Go Product Brief

Infineon Distance2Go Product Brief

24 ghz sensor development kit utilizing infineon bgt24mtr11 rf transceiver and xmc4200 32-bit arm cortex-m4 mcu series
Hide thumbs Also See for Distance2Go:

Advertisement

Quick Links

Product Brief
Distance2Go development kit
24 GHz sensor development kit utilizing Infineon BGT24MTR11 RF transceiver
and XMC4200 32-bit ARM® Cortex®-M4 MCU series
This development kit allows the user to implement and test several sensing applications
at the 24 GHz ISM band such as FMCW distance measurement, Doppler based movement
detection, Doppler based direction of movement detection, and Doppler based speed
measurements of targets. The kit consists of the BGT24MTR11 transceiver MMIC and a
XMC4200 32-bit ARM® Cortex®-M4 for signal processing and communication via USB.
A block diagram of the demonstrator board is shown in the figure below highlighting all main
board components. The board is already preprogrammed using Infineon's DAVE™ develop-
ment tool. The module features a phased locked loop that is controlled with the XMC4200 to
generate the FMCW ramps required for distance measurement. The MCU samples up to 2 IF
channels of the transceiver chipset and communicates via USB interface to a connected PC.
A provided PC application GUI (Windows XP/Vista/7/8) can be used to display and analyze
acquired data in time and frequency domain. The GUI allows for the extraction of the radar
time domain signals allowing for advanced debugging and algorithm development.
Applications
Drone soft-landing
Drone obstacle avoidance
Robotics obstacle avoidance
Fractional-N PLL
REF 40 MHz
Micro USB
Breakable
(debugger)
debugger board
1) Usage of the FMCW and/or Doppler FW and SW requires agreeing to Infineon's user's agreement and licensing terms.
2) Maximum distance based on metal corner reflector, maximum distance up to 12 m can be achieved for human targets.
www.infineon.com/24GHz
Arrow.com.
Downloaded from
Tank level-sensing
Intelligent switches
Intelligent door opener
Pin header X2
BGT24MTR11
24 GHz radar MMC
Frame for metal RF
shield placement
P-MOS switch
Pin header X1
Baseband amplification section
Key features
Capability to detect distance
of multiple targets
Capability to detect motion,
speed and direction of movement
(approaching or retreating)
Very small form-factor
(4.5 × 3.6 cm) 24 GHz ISM band
module that can be used as a
development kit or mounted
as a daughter board in a system
BGT24MTR11 – 24 GHz highly
integrated RF MMIC
XMC4200 ARM® Cortex®-M4 –
32-bit industrial microcontroller
Debug over cortex 10 pin debug
connector
Integrated multiple element patch
antennas
Contents of the kit
24 GHz demo board
User's manual
SW GUI to operate kit
FMCW FW and SW
(also available as source code)
Doppler FW and SW
(also available as source code)
Schematic and bill-of-materials of module
Micro USB
(main)
Features
Minimum distance: 0.5 m
Maximum distance: 25 m
Radar system field of view:
– horizontal: 20° (simulated)
– vertical: 42° (simulated)
1)
1)
2)

Advertisement

loading

Summary of Contents for Infineon Distance2Go

  • Page 1 Minimum distance: 0.5 m › Maximum distance: 25 m 1) Usage of the FMCW and/or Doppler FW and SW requires agreeing to Infineon’s user’s agreement and licensing terms. › Radar system field of view: 2) Maximum distance based on metal corner reflector, maximum distance up to 12 m can be achieved for human targets.
  • Page 2 Product Brief Distance2Go development kit 24 GHz sensor development kit utilizing Infineon BGT24MTR11 RF transceiver and XMC4200 32-bit ARM® Cortex®-M4 MCU series Block diagram To PC Stand-by LED Micro USB +5 V Microcontroller +3.3 V External DC input Power supply...