Table of Contents
Advertisement
24 GHz radar tools and development environment
XENSIV™ 24 GHz radar demo boards
3 Customizing radar applications
Check successful build in the Console window, where the build result details are displayed.
•
Figure 28
DAVE™ console
Ensure that the debugger of the 24 GHz radar board is connected to the PC via USB "type A to micro-B" cable
•
through the USB connector (e.g., X12 connector for DEMO POSITION2GO board).
Set debug configurations by clicking on the drop-down menu of the Debug toolbar button (bug icon) and
•
selecting Debug Configurations... as shown in Figure 29. Alternatively, press key F11 to directly start the
debug session.
Figure 29
Start debug session toolbar button
If opening Debug Configurations, a window as shown in Figure 30 appears.
Double-click on GDB SEGGER J-Link Debugging to create a new debug configuration.
•
Click on the Debug button to Flash and start a debug session.
•
User manual
20
Revision 1.40
2023-02-14
Advertisement
Table of Contents
