Table of Contents
Advertisement
The hob
Hotplate controls
Adjust the heat setting of the individual hotplates using the four
hotplate controls.
Setting
0
Off position
1-9
Heat settings
Zone activation
/
/
ö
/õ
/
í
æ
When you switch on a hotplate , the indicator lamp lights up.
Residual heat indicator
The hob has a residual heat indicator for each hotplate. It
shows which hotplates are still hot. Even if the hob is switched
off, the display remains lit until the hotplate has cooled down
sufficiently.
You can save energy by using the residual heat to keep a small
dish warm, for example.
Buttons
The sensors are located under the individual buttons. They
must not be pressed too firmly. Just touch the corresponding
symbol.
Symbol
Button function
Selects the type of heating and temperature
!
Selects automatic programmes
`
Selects automatic self-cleaning
q
Moves one row down
X
Moves one row up
Y
Press and hold = selects the memory
f
Press briefly = starts the memory
Setting rapid heating
c
Opens and closes the time-setting options
0
Switches the oven light on and off
B
Press briefly = calls up the temperature
°
Press and hold = opens and closes the Basic
settings menu
Activates/deactivates the childproof lock
D
Switches the oven on and off
%
8
Meaning
The hotplate is switched off.
1 = lowest setting
9 = highest setting
Switches on the large dual-circuit
hotplate or extended cooking
zone.
Symbol
Button function
Press briefly = starts/pauses operation
n
Press and hold = cancels operation
Rotary selector
The rotary selector is used to alter the default values and set
values. The brackets in the control panel show which value you
can adjust.
The rotary selector is retractable. Press on the rotary selector to
pop it in or out.
Temperature indicator
The temperature indicator bars show the heating phases or
residual heat in the cooking compartment.
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment. If all bars are filled, the optimum time for
placing the dish in the oven has been reached.
The bars do not appear when settings are made for grilling and
cleaning.
You can use the
button to check the current heating
°
temperature while the oven is heating up. Due to thermal
inertia, the temperature displayed may differ slightly from the
actual temperature in the cooking compartment.
Residual heat
The temperature indicator shows the residual heat in the
cooking compartment when the appliance is switched off. If all
the bars are filled, the temperature in the cooking compartment
is approximately 300 °C. Once the temperature has dropped to
approximately 60 °C, the display goes out.
Advertisement
Table of Contents
