Wi-Fi Setup - ACU-RITE 06088 Instruction Manual

Wi-Fi Setup for Weather Underground
Forecast
This weather station features wireless internet connectivity in order to connect and down-
load forecasts from Dark Sky. You also have the option to share your weather data with
Weather Underground, but this is not required to get a forecast.
1. (OPTIONAL) If you do not already have a WU (Weather Underground
and would like to send your data to WU, please create your account at
wunderground.com prior to following the next steps. To add this weather station to
your WU account:
Sign in to your Weather Underground
Navigate to My Profile > My Weather Stations > Add New PWS.
Enter all required location info.
When prompted for "Station Hardware", select "AcuRite Pro Weather Center".
You will be provided with a WU Station ID and Station Key once you have
submitted all required info (record for step 5, below).
2. Power on the display using included power cord. If the unit has been powered on for
more than 30 minutes, press and release the "
button to re-activate Wi-Fi setup. *
3. Connect to the Wi-Fi signal (named AcuRite
06088M) of the AcuRite display from
your computer or mobile device.
4. Open your web browser on the device that is
connected to the AcuRite display. Type
"192.168.4.1" in the address bar and hit enter to
access the AcuRite Wi-Fi display settings website
(shown right).
5. Select or enter your wireless network name and password. Fill in your country and
postal code to download your 2-day forecast from Dark Sky. If you want to send
data to Weather Underground, enter your Station ID and Station Key. Press"Save"
to save your credentials.
NOTE: This weather station display only supports 2.4 GHz wireless networks.
6. A Wi-Fi status message will appear confirming your connection to the display. If the
connection was not successful, please verify your credentials and/or visit the
Troubleshooting section (see page 13).
7. Within an hour after the display is connected to Wi-Fi, forecasts from Dark Sky will
be shown on your display. If you entered your WU credentials, data from your
sensor will automatically begin to upload to Weather Underground
sensor data remotely at www.wunderground.com or from a mobile device using
the Weather Underground
Play Store.
*In order to re-activate Wi-Fi setup, Wi-Fi needs to be set to ON. See "Connections"
sub-menu (page 10).
TM
account.
app, available from the iOS App Store or Google
TM
3
and Dark Sky
TM
"
TM
) account
TM
. Monitor