Table of Contents
Advertisement
AUTO DIM MODE: Automatically adjusts display brightness based on time of day.
5. Connections
Access the "Connections" sub-menu to add, remove or view information
about a sensor, or enable Wi-Fi setup.
6. Units
Access the "Units" sub-menu to change measurement units for barometric
pressure, temperature, wind speed, rainfall and distance.
7. Calibrate
Access the "Calibrate" sub-menu to adjust display or sensor data. First,
select the display or sensor for which you wish to calibrate readings.
Second, select the reading you wish to calibrate. Lastly, follow the on-screen
prompts to adjust the value.
8. Factory Reset
Access the "Factory Reset" sub-menu to revert the display back to factory
defaults. Follow the on-screen prompts to perform the reset.
Weather Forecast
While connected to Wi-Fi, weather forecasts for today and tomorrow are
downloaded from Dark Sky. Dark Sky is one of the most accurate sources of
hyperlocal weather information. It is backed by a wide range of weather data
sources, which are aggregated together to provide the most accurate forecast
possible for a given location. With down-to-the-minute forecasts, you'll know
exactly when conditions will change so you can plan your day.
If the weather station is not connected to Wi-Fi, the forecast is generated
using data from the outdoor sensor. Self-calibrating forecasting uses a unique
algorithm to analyze changes in pressure over a time period (called Learning
Mode) to determine your altitude. After 14 days, the self-calibrated pressure is
tuned in to your location and the unit is ready for superior weather prediction.
Moon Phase
The moon phase is displayed between 7:00 p.m. to 5:59 a.m. when conditions
allow for moon visibility. The phases of the moon are conveyed through simple
lunar phase icons:
NEW
6:00 a.m. - 9:00 p.m. = 100% brightness
9:01 p.m. - 5:59 a.m.= 15% brightness
WAXING
CRESCENT
QUARTER
1ST
FULL
10
3RD
WANING
QUARTER
CRESCENT
Advertisement
Table of Contents
