Download Print this page
ACU-RITE 06034RM Quick Manual
ACU-RITE 06034RM Quick Manual

ACU-RITE 06034RM Quick Manual

Rain gauge

Advertisement

Quick Links

Package Contents
Environment Systems
Rain Gauge Setup
1
Separate rain gauge
cover from the base by
squeezing tabs.
Rain Gauge
2
Model 06034RM
2
Remove rain gauge cover
by lifting upwards.
1
3
3
Remove battery box by
squeezing the two tabs
on each end together.
2
3
Installation
Rain Gauge
4
Install 2 AA batteries
into battery
Placement for Maximum Accuracy
4
compartment.
Proper placement is critical to the accuracy and
performance of this product.
Note: If you are syncing
sensor with a display (not
Important Placement Guidelines
included), ensure that the
• Rain gauge transmits wireless signal up to 100 ft (30 m).
A-B-C switch, located in
Locate away from objects that may limit wireless
the battery compartment,
matches on both units.
communication, like thick walls or metal surfaces.
• Mount at least 3 ft (0.9 m) or higher above the ground
for optimal wireless range.
5
Securely place the battery
box back into the rain gauge
base and re-attach cover
onto rain gauge base.
5
DO NOT
DO NOT
4
PLACE IN WATER OR
PLACE IN AREAS WHERE
IN UNEVEN OR LOW
PLANT GROWTH CAN
SPOTS THAT MAY
GROW INTO CASE AND
BECOME FLOODED.
OBSTRUCT RAIN FLOW
Rain Gauge Installation
• To ensure accurate rain measurement,
the rain gauge MUST be placed on a
flat, level surface.
• Ensure the rain gauge is not placed in
a low spot that could become flooded
SQUEEZE TABS TO OPEN
or in an area where there are obstruc-
tions above it.
1
Separate the rain gauge cover from the
rain gauge base.
2
Locate the two holes on the rain gauge
SQUEEZE
base.
2
SQUEEZE TABS TO OPEN
INSTALL 2 SCREWS USING
HAND TOOLS ONLY.
3
Fasten the rain gauge base to a
THEN RE-ATTACH UPPER CASING
sturdy surface, like a deck railing
OK
or a fence post, with screws (not
included) using hand tools.
4
Re-attach cover onto rain gauge base.
DO NOT
DO
5
6
PLACE IN AN
PLACE ON A LEVEL
AREA WITH
SURFACE AT LEAST
OBSTRUCTIONS ABOVE
3 FEET FROM THE
GROUND WITH NO
Congratulations!
1
You're ready to start using
the Rain Gauge!
SQUEEZE
INSTALL 2 SCREWS USING
HAND TOOLS ONLY.
THEN RE-ATTACH UPPER CASING
need help?
3
1-844-228-5465
info@chaney-inst.com
Learn More at AcuRite.com
2
For more information about
AcuRite Environment Systems, to view
4
installation videos, and to purchase additional
compatible AcuRite sensors, visit
SQUEEZE
www.AcuRite.com
7

Advertisement

loading

Summary of Contents for ACU-RITE 06034RM

  • Page 1 HAND TOOLS ONLY. or in an area where there are obstruc- Note: If you are syncing THEN RE-ATTACH UPPER CASING need help? Model 06034RM sensor with a display (not tions above it. Remove rain gauge cover Important Placement Guidelines included), ensure that the 1-844-228-5465 by lifting upwards.
  • Page 2 Chaney. This warranty gives you specific legal rights, and you may also have other rights which vary from may cause undesired operation of the device. state to state. For in-warranty claims: Chaney Instrument Co. 965 Wells St., Lake Geneva, WI 53147 06034RM INST 080614...