Page 1
Instruction Manual Display for 5-in-1 Weather Sensor model 06022 Package Contents 1. Display with Tabletop Stand 2. Power Adapter 3. Instruction Manual This product requires an AcuRite 5-in-1 Weather Sensor (sold separately) to be operational. IMPORTANT PRODUCT MUST BE REGISTERED...
Page 3
1. Previous 2 Wind Directions SET Button For setup preferences. 2. Current Wind Speed 20. SELECT Button 3. Current Wind Direction Press to change the WEATHER SELECT 4. Current Indoor Temperature category data being displayed. Arrow icon indicates direction 21. Weather Ticker temperature is trending.
Page 4
BACK OF DISPLAY 1. Integrated Hang Hole For easy wall mounting. Button For dimmer control while using power adapter. Activates momentary 6. A-B-C Switch backlight while on battery power. ID code that must match 5-in-1 3. Plug-in for Power Adapter sensor’s A-B-C switch to ensure units synchronize.
SETUP Display Setup AcuRite recommends high quality alkaline batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended. Set the A-B-C Switch Plug Power Adapter into Electrical Outlet The A-B-C switch is located inside the battery compartment. It can be set to A, B or C.
Set the Time, Date & Units Press the “ SE T ” button, located on the front of the display, to enter SET MODE. Once in set mode, the preference you are currently setting will blink on the display. To adjust the currently selected (flashing) item, press and release the “ “...
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display and the sensor are critical to the accuracy and performance of this product. Display Placement Place the display in a dry area free of dirt and dust. To ensure accurate temperature measurement, place out of direct sunlight and away from heat sources or vents.
Weather Select Weather Select displays data including wind chill, dew point, heat index, feels like, days with rain this month, and days since last recorded rainfall. To change the “Weather Select” category shown, press the “SELECT” button on the front of the display.
Weather Ticker ™ The Weather Ticker automatically flashes your real-time weather information and alerts as text in the lower part of the display screen. The possible WEATHER TICKER messages are as follows: HEAT INDEX-XX WINDCHILL-XX DEW POINT-XX IT FEELS LIKE XX OUTSIDE 7 DAY HIGH TEMP. XX- MM/DD 7 DAY LOW TEMP.
Troubleshooting Problem Possible Solution • Make sure both the display and 5-in-1 sensor are placed away from any heat sources or vents (see page 7). Inaccurate • Make sure both units are positioned away from moisture sources (see page 7). temperature or humidity •...
Care & Maintenance Display Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Calibration The indoor / outdoor temperature and humidity readings, and barometric pressure can be calibrated on the display to improve accuracy.
Specifications DISPLAY’S BUILT-IN TEMPERATURE SENSOR 32ºF to 122ºF; 0ºC to 50ºC RANGE DISPLAY’S BUILT-IN 1% to 99% RH HUMIDITY SENSOR RANGE WIND SPEED 0 to 99 mph; 0 to 159 km/h WIND DIRECTION 16 points INDICATORS RAINFALL 0.01 inches (0.25 mm) and up WIRELESS RANGE 330ft / 100m depending on home construction materials...
Customer Support AcuRite customer support is committed to providing you with best-in- class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 AcuRite Visit us at www. .com Installation Videos Register your Product...