Transfer Board Cable - HP ProBook x360 11 G6 Education Edition Maintenance And Service Manual

Transfer board cable

NOTE: The transfer board cable is included in the Cable Kit, spare part number M03750-001.
Before removing the transfer board cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
Remove the transfer board cable:
1. Turn the keyboard/top cover upside down with the front toward you.
2. Release the ZIF connector (1) to which the transfer board cable is connected, and then disconnect the
transfer board cable from the transfer board.
3. Remove the transfer board cable (2).
Reverse this procedure to install the transfer board cable.
Keyboard/top cover on page 28).
Component replacement procedures 37