Display Assembly - HP ProBook x360 11 G6 Education Edition Maintenance And Service Manual

Display assembly

Table 5-11 Display assembly spare part information
Description
11.6 in, HD, LED, UWVA, TouchScreen display assembly with HD webcam (220 nits) in dusk blue finish
11.6 in, HD, LED, UWVA, TouchScreen display assembly with HD webcam (220 nits) in chalkboard gray finish
11.6 in, HD, LED, SVA, TouchScreen display assembly with non-HD webcam (220 nits) in dusk blue finish
11.6 in, HD, LED, SVA, TouchScreen display assembly with non-HD webcam (220 nits) in chalkboard gray finish
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
5. Remove the battery (see
Remove the display assembly:
1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE:
WLAN antenna cable connects to the WLAN module #2/Aux terminal.
2. Release the ZIF connector (2) to which the webcam cable is connected, and then disconnect the webcam
cable from the system board.
3. Release the webcam cable from the retention clips (3) built into the bottom cover.
4. Release the ZIF connector (4) to which the display panel cable is connected, and then disconnect the
display panel cable from the system board.
Battery on page
The #1/white WLAN antenna cable connects to the WLAN module #1/Main terminal. The #2/ black
Keyboard/top cover on page
39).
Spare part number
L83963-001
L83961-001
L83961-001
L83960-001
28).
Component replacement procedures 53