Battery - HP ProBook x360 11 G6 Education Edition Maintenance And Service Manual

7. Remove the webcam module (4) and cable and the transfer board and cable.
Reverse this procedure to install the transfer board and the webcam module.

Battery

Table 5-4 Battery spare part information
Description
Battery (3 cell, 48 WHr, 4.21 AHr, Li-Ion; includes cable)
Before removing the battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
Remove the battery:
1. Remove the four Phillips M2.5×4.4 screws (1) that secure the battery to the bottom cover.
2. Lift the rear edge of the battery (2) and swing it up and forward until it disconnects from the system board.
Keyboard/top cover on page 28).
Component replacement procedures
Spare part
number
L12791-852
39