Improper installation of the ground plug can result in the risk of electrical shock. If repair or replacement
of the plug or cord is necessary, do not connect the ground wire to either flat blade terminal. The wire
with green insulation (with or without a yellow stripe) is the grounding wire.
1. For any question regarding proper installation of the ground plug, consult a qualified
(licensed or certified) electrician.
2. Do not modify the plug provided. If the plug does not fit the outlet, have the proper
outlet installed by a qualified electrician.
3. This product is for use on a nominal 110-volt circuit and has a grounding plug that
looks like the plug in Figure 2. Make sure that the product is connected to an outlet
having the same configuration as the plug. Do not use adapters with this product.
4. If an extension cord is required, use only a three- w i r e extension cord that has the
same configuration as the unit cord, including the (round) ground terminal. Make sure
that the extension cord is plugged into a properly grounded receptacle.
5. When using an extension cord, be sure it is in good condition and heavy enough to
meet the specifications in the chart below. If an extension cord is needed the following
wire sizes must be used.
25' cord (7.62m) .......................................................... 10, 12, or 14 Gauge
50' cord (15.24m) ....................................................... 10 or 12 Gauge
100' cord (30.48m) ............ ....................................... 10 Gauge
Grounding instructions for all countries using a 2-pronged plug configuration.
This product must be properly grounded. In the event of an electrical short circuit, grounding reduces
the risk of electrical shock by providing an alternate path for the electrical current.
This product is equipped with a cord that has a ground wire and an appropriate ground plug. Plug the unit into an
outlet that is properly installed and grounded in accordance with local codes and ordinances.
Safety Note: Users in countries in continental Europe and Australia and anywhere that offers a two-pronged plug
must be aware that this configuration does not provide grounding.
Page | 2
Figure 2
Need help?
Do you have a question about the Maxi-Miser 3000 PRO and is the answer not in the manual?
Questions and answers