Repeater Mode - D-Link DIR-809 User Manual

Section 3 - Configuration
This section will show you how to configure or change the default settings for your DIR-809
using the web-based configuration utility in Repeater Mode. Repeater Mode is explained
in Repeater Mode on page 9. The functions in repeater mode are otherwise identical
to those described in router mode. This section lists only the differences.
To access the configuration utility, open a web browser such as Internet Explorer and enter
http://dlinkrouter.local./ or you may also connect by typing the IP address of the router
(by default this is http://192.168.0.1 in router mode) in the address bar. In repeater mode,
the only reliable way to access the interface will be through the URL.
Enter your password. If you previously followed the setup wizard, please use the
admin password you entered during the wizard. Otherwise, leave the password blank.
Click Login to proceed.
Note: If you cannot remember your password and cannot log in, press the reset button on the
back of the device for longer than 10 seconds to restore the router to its default settings.
If you are having trouble logging in or experiencing trouble with the configuration utility,
try clearing your browser cache or try using your web browser's private browsing mode.
D-Link DIR-809 User Manual

Repeater Mode

LOGIN
Login to the router :
User Name : Admin
Password : Login
83