D-Link DIR-809 User Manual page 110

Section 3 - Configuration
Destination Enter the destination IP address and specify the prefix length for the
IP Address / rule.
PrefixLength:
Port Range: Enter the port range to apply the rule to. If the protocol is set as ALL
or ICMP this feature is disabled.
Click the Save Settings button when you are finished.
D-Link DIR-809 User Manual
IPv6 Firewall (continued)
DIR-809
IPV6 FIREWALL IPV6 FIREWALL
IPV6 FIREWALL
The firewall settings section is an advance feature used to allow or deny traffic from passing through the device. It works in the same
way as IP Filters with additional settings. You can create more detailed rules for the device.
Save Settings Don't Save Settings
IPV6 SIMPLE SECURITY
Enable IPv6 Simple Security :
20 -- IPV6 FIREWALL RULES
Remaining number of rules that can be created: 24
Configure IPv6 Filtering below:
Turn IPv6 Filtering OFF ▼
Turn IPv6 Filtering ON and ALLOW rules listed
Turn IPv6 Filtering ON and DENY rules listed
Name Schedule
Always ▼
IP Address /PrefixLength
Interface
Source
LAN ▼
IP Address /PrefixLength
Interface
Dest
LAN ▼
Save Settings Don't Save Settings
ADVANCED
Protocol
LAN ▼
Port Range
~
106